|
|
PERMASEALS:
PERMASEAL NYLON TERMINALS OFFER A WATER PROOF ADHESIVE SEAL. THE SEAL
GIVES YOU LONG LASTING MOISTURE CONNECTIONS WHICH WITH STAND WATER,
SALT, CONDENSATION, HEAT AND CORROSION. THE INSIDE WALLOF THE HEAT
SHRINKABLE NYLON PERMASEAL SLEEVE IS LINED WITH A SPECIAL HOT MELT
ADHESIVE PERMITTING WIRES TO BE EASILY INSERTED INTO THE SPLICES AND
TERMINALS. WHEN THE SLEEVE IS HEATED, THE ADHESIVE MELTS AND FLOWS
UNDER PRESSURE FORM THE TUBING. ANYONE NEEDING 100 PERCENT MOISTURE
PROOF SEAL SHOULD USE THE PERMASEAL. PERMASEALS WORK WELL IN THE
MARINE INDUSTRY. ANOTHER PLACE THEY WORK WELL IS IN HEAVY DUTY
EQUIPMENT. PERMASEALS COME IN SEVERAL DIFFERENT STYLES AND SIZES. BUTT
SPLICE, RING TONGUE, SPADE, SNAP PLUG, QUICK DISSCONNECT, COUPLERS,
HOOK AND 3-WAY. THEY OFFER 22 TO 8 WIRE RANGE.
The Sur-form choice is a simple one. After extensive research, it was detected, that materials such as aluminum, brass, copper, low carbon steels, zinc and 302, 303 stainless steel are well suited for tapping with a cold forming tool. Cold forming eliminates the problem of chip disposal. Thus many blind hole applications can be solved with a cold forming tap. SUR-FORM taps produce better threads because they: 1). produce no chips that cause over loading and oversize threads. 2). eliminates the problem of tearing threads. 3). improve flank finish due to the cold-forming process. Lubricant grooves enable air to escape and the coolant to penetrate the work area. In most cases speed can be increased by 200% with a SUR-FORM tap compared to a conventional one. For more information on a SUR-FORM tap or other fine products call C.I.S at 1-800-466-4065.
NYCOIL SUPERCOIL
The SUPERCOIL is super flexible and is 100% kink proof. No spring guards are needed with the SUPERCOIL and can be extended up to 100% of total length. The SUPERCOILS soft polyurethane material will not mar finishes and is strong enough to repel most chemicals and oils. The 18 inch leg on tool end eliminates tangling of tool with hose. It also has low tension retractability...less user fatigue. The SUPERCOIL is more durable and lighter weight than rubber hose. Both legs are equipped with brass swivel compression fittings.
The NYCOIL SUPERCOIL is specifically designed for use with air tools. Applications for the SUPERCOIL include the automotive industry, assembly lines, work bench stations and nailers and staplers. Contact your C.I.S. marketing specialist for SUPERCOIL specifications for NYCOILS lightweight low tension retractable and abrasive resistant SUPERCOIL. Available in high visible yellow and safety neon orange. Clarcorp can also help with your pneumatic couplers and fittings. 1-800-466-4065
